Coupe L4-1.9L DOHC VIN 7 (1994)
3.
Apply Kent Industries High Tech Clear Leak Chek (P/N 10200) or 3M Ultra-Pro Autobody Sealant Clear (P/N 08302) or equivalent, to joint and
attach joint together.
4.
Snap drip molding into place.
5.
Using a clean shop towel, apply Kent Industries Acrysol (P/N 20005) or 3M General Purpose Cleaner (P/N 08984) or equivalent and wipe area
clean of excessive sealer.
6.
Water test to verify repair.
SECTION 2
1.
Clean area with Kent Industries Acrysol (P/N 20005) or 3M General Purpose Cleaner (P/N 08984) or equivalent.
2.
Apply Kent Industries High Tech Leak Chek Black (P/N 10070) or 3M Automotive Joint and Seam Sealer Black (P/N 06848) or equivalent along
underside of windshield encapsulation, up to roof flange, starting at drip rail joint working down A-pillar approximately 127 mm (5 inches).
3.
Using a clean shop towel, apply Kent Industries Acrysol (P/N 20005) or 3M General Purpose Cleaner (P/N 08984) or equivalent and wipe sealer
to obtain a smooth appearance.
4.
Water test to verify repair.
CLAIM INFORMATION:
To receive credit for this repair, submit a claim through the Saturn Dealer System. See illustration.