saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Paint - Code Information|Page 6737 > < Paint - Code Information|Page 6735
Page 7
background image

1910 South State Avenue
Indianapolis, In 46203
(800) 347-2439 (Toll Free) or (317) 788-9925 (Local)
Fax (317) 788-9930
www.carbrite.com
[email protected]
*We believe these sources and their products to be reliable. There may be additional manufacturers of such products. General Motors does not endorse,
indicate any preference for or assume any responsibility for the products from these firms or for any such items which may be available from other
sources.

If rail dust remover is not available in your area, call one of the numbers listed above for a distributor near your location.

Warranty Information (excluding Saab U.S. Models)

Important
Refer to the Policy & Procedures Manual, section 1.2.1.7 for detailed information regarding warranty coverage for this condition.

Important
In certain cases where the vehicle finish is severely damaged and the actual repair time exceeds the published time, the additional time should
be submitted in the "Other Labor Hours" field.

Warranty Information (Saab U.S. Models)

Disclaimer

Technical Service Bulletin # 91-T-19A

Date: 931101

Paint - Polishing Techniques for Base Coat/Clear Coat

NO.: 91-T-19A
DATE: November, 1993
GROUP: Body
CORP NO.: 1815O7R

SUBJECT:
Information on Polishing Techniques for Base Coat/Clear Coat Paint

Due to the addition of "MODELS AFFECTED," this bulletin supercedes bulletin 91-T-19, which should be discarded.

MODELS AFFECTED:
1991-1994 Saturns

PURPOSE:
Saturn base coat/clear coat finishes require special attention to assure that the customer receives full benefit of this new paint technology.

Paint - Code Information|Page 6737 > < Paint - Code Information|Page 6735