saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Paint - Code Information|Page 6739 > < Paint - Code Information|Page 6737
Page 9
background image

The above list of paint conditions and manufacturers recommended repair materials are offered by 3M and Meguiar's.

Contact your local 3M or Meguiar's representative and ask for a demonstration of their products. The recommended procedures should be followed to
achieve the best results.

We believe these sources, their equipment, and materials to be reliable. There may be additional manufacturers of such materials and equipment. Saturn
Corporation does not endorse, indicate any preference for, or assume responsibility for the products or equipment from these firms or for any such items
which may be available from other sources.

Technical Service Bulletin # 94-T-34

Date: 940801

White Paint - Yellow Stains/Spots

BULLETIN NO.: 94-T-34 

ISSUE DATE: August, 1994

GROUP/SEQ. NO.: Body-11

CORPORATION NO.: 481704 

TECHNICAL INFORMATION BULLETIN

SUBJECT:
Yellow Stains and/or Spots on Fenders, Fender Extensions and/or Rear Quarters (Replace Polymer Panels) - White Vehicles Only

MODELS AFFECTED:
1994 White Saturns built between VIN RZ261532 - RZ344164

CONDITION:
Some owners may comment about yellow stains or yellow spots on the fenders, fender extensions or rear quarter panels of white vehicles (paint code 40
[WA 9563]). This condition is only possible on the fenders, fender extensions or rear quarter panels of the vehicle. No other exterior polymer panels or
steel panels on the vehicle are involved.

IMPORTANT:

This condition may be more prevalent in hot and humid climates.

CAUSE:

Paint - Code Information|Page 6739 > < Paint - Code Information|Page 6737