Coupe L4-1.9L DOHC VIN 7 (1994)
18.
Separate recliners from cross tube and remove recliner cover fastener and cover from recliners.
INSTALLATION
1.
Install the recliner cover and fastener to recliners.
2.
Assemble recliner assemblies to cross tube.
3.
Install recliners and cross tube assembly to seat back with four attaching bolts (two bolts on each side of seat back assembly).
Tighten 27 Nm (20 lb ft)
4.
Pull seat back cover down and engage lower J-strips.
Notice
On Coupes, make sure E-Z entry cable mounting arm on recliner does not get caught in seat track.
5.
Install seat back assembly to seat cushion assembly with four attaching bolts (two bolts on each side of seat assembly).
