Coupe L4-1.9L DOHC VIN 7 (1994)
-
After all RTV is removed, clean the surfaces with a chlorinated solvent, such as carburetor spray cleaner, brake clean or alcohol and
Scotch-Brite(R) Pad.
RTV APPLICATION & OIL PAN INSTALLATION
IMPORTANT: Only the SATURN recommended RTV (SATURN P/N 21006236, should be used. Surfaces to be sealed must be clean and dry.
1. Cut tube opening to approximately 2.0 mm (0.080 in.) inner diameter.
2. Apply the following RTV bead size to clean surface:
-
Oil Pan: 4.0 mm (0.160 in.).
-
Follow each surface pattern and maintain the bead diameter cross sections required to ensure the joint is sealed.
NOTICE: Apply bead on the inside edge groove as illustrated.
3. Oil pan. Reverse removal procedures to install.
NOTICE: Extra RTV is required at oil pan, cylinder head and cam/rocker cover T-joints to make sure gaps are filled. The 1992-94 engines requires
RTV bead around the top, center hole bolt.
