Coupe L4-1.9L DOHC VIN 7 (1994)
Fig. 14 Evaporator Removal
55.
Remove and discard drain, heater core pipes, evaporator block and evaporator pipe O-ring front of dash seals, Fig. 11.
56.
Remove mode valve assembly attaching screws, Fig. 12, then lift mode valve assembly upward to remove.
57.
Remove upper air inlet case attaching screws, then lift upward to remove, Fig. 13.
58.
Remove evaporator pipe clamp attaching screws, then lift evaporator upward to remove, Fig. 14.
59.
Reverse procedure to install, noting the following:
a. Torque steering column attaching screws to 33 ft. lbs.
b. Torque thermal expansion valve to evaporator to 88.5 In. lbs.
c. Torque thermal expansion valve liquid and suction lines to 18.5 ft. lbs.
60.
On models with airbag, rearm airbag system.
