Coupe L4-1.9L DOHC VIN 7 (1994)
If this component is good, go to the next item indicated on the Symptom Chart.
Circuit 20G
LOCATION:
Connects brake switch connector cavity (gray connector) to ABS control module connector cavity C03.
TYPE:
Light Blue 20 gage wire
FUNCTION:
This circuit supplies battery voltage to the ABS control module so that open or shorted stop lamp circuits can be detected. If a stop lamp circuit is
OPEN, Circuit 200 will be pulled high. If a stop lamp circuit is SHORTED, Circuit 200 will be pulled low. Either condition sets an ABS
diagnostic flag.
REPAIRS:
Check for OPEN or SHORTS
Repair as needed.
If this component is good, go to the next item indicated on the Symptom Chart.
Circuit 20H
LOCATION:
Connects brake switch cavity D (black connector) to I/P body interconnect cavity G.
TYPE:
Light Blue 18 gage wire
FUNCTION:
This circuit supplies battery voltage to the center high-mounted stop lamp bulbs.
REPAIRS:
Check for OPEN or SHORTS
Repair as needed.
If this component is good, go to the next item indicated on the Symptom Chart.
Circuit 20B
LOCATION:
Connects I/P body interconnect cavity G to center high mounted stop lamp cavity A.
TYPE:
Light Blue 20 gage wire
REPAIRS:
Check for OPEN or SHORTS
Repair as needed.
If this component is good, go to the next item indicated on the Symptom Chart.
Circuit 20F/20C
CIRCUIT 20F/20C
Function:
These circuits supply battery voltage to the left and right stop lamp bulbs in the rear turn/stop lamp assemblies.
Repairs:
Check for OPENS/SHORTS.
