Coupe L4-1.9L DOHC VIN 7 (1994)
2.
Using a small screwdriver, pry dome lamp lens retainer clip, located on back of dome lamp assembly, loose and remove dome lamp lens from
dome lamp assembly.
3.
Connect electrical connector to dome lamp assembly.
4.
Position dome lamp assembly to roof of vehicle. Make sure that wiring is positioned to the front of vehicle.
NOTICE:
To prevent damage to the vehicle, make sure to use self-tapping screw, P/N 11509339.
5.
Position self-tapping screw (P/N 11509339) into hole in dome lamp assembly.
6.
Using a 7 mm socket with a ratchet or nut driver, apply upward pressure on self-tapping screw, and install self-tapping screw through dome lamp