Coupe L4-1.9L DOHC VIN 7 (1994)
REPAIRS:
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good go to the next item indicated on the Symptom Chart.
IP Batt Fuse
LOCATION:
Underhood junction block
TYPE:
30A Maxifuse
FEEDS:
Circuit 1936
If one of the following systems is operating normally, the fuse is most likely good:
^
Headlamp switch
^
Dome lamp
^
Remote mirror switch
^
Map lights
^
Power door lock relay
^
Radio
REPAIRS:
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good go to the next item indicated on the Symptom Chart.
Circuit 80/80A
CIRCUIT 80/80A
Function:
This is the ground wire for chime module through the key minder switch. The module is grounded when the key is in the ignition, and the key
has been turned.
CIRCUIT 80
Location:
Connects I/P junction block connector cavity E1 to Ignition Switch connector cavity B.
Type:
Light Green 22 gage wire
Repairs:
Check for OPENS/SHORTS.
If this component is good go to the next item indicated on the Symptom Chart.
CIRCUIT 80A
Location:
Connects ignition switch connector cavity B to passive restraint control module (PRCM) connector cavity A (through I/P body inline cavity
B).
Type:
Light Green 22 gage wire
Repairs:
