Coupe L4-1.9L DOHC VIN 7 (1994)
^
Catalytic converter kit
(P/N 21006671)
^
One exhaust system clamp
(P/N 15595048)
8.
File burrs from inside front exhaust pipe.
9.
Clean converter flange surface on intermediate pipe with a wire brush.
IMPORTANT:
The sleeve included with replacement catalytic converter is only required if a service front exhaust pipe is installed on vehicle.
10.
Install new bolts and gasket onto outlet flange of replacement catalytic converter.
11.
Install exhaust system clamp on converter inlet.
12.
Position catalytic converter under vehicle with drain holes facing down.
13.
Slide end of converter inlet over front exhaust pipe.
14.
Install catalytic converter outlet flange to intermediate pipe and ensure converter is properly located.
15.
Install catalytic converter to intermediate pipe nuts.
Torque: 31 N.m (23 ft-lbs)