Coupe L4-1.9L DOHC VIN 7 (1994)
3.
Remove port fuel injector assembly and plug the injector port with a clean shop towel.
4.
Remove injector O-rings and discard.
INSTALLATION
1.
Lubricate new injector O-ring seals with clean engine oil and install on injector assembly.
2.
Install port fuel injector assembly into fuel rail, with injector's electrical connector facing upward.
3.
Slide fuel injector retainer clip and engage on injector.
4.
Install fuel rail assembly. Refer to FUEL RAIL REPLACEMENT procedure.