Coupe L4-1.9L DOHC VIN 7 (1994)
Electronic Brake Control Module: Service and Repair
Fig. 126 ABCM Removal.
The ABCM is located under the instrument panel, to the left of the steering column. The ABCM and Powertrain Control Module (PCM) are
located in the same carrier. The ABCM is outboard of the PCM, closest to the lefthand side kick panel.
1. Disconnect battery ground cable.
2. Remove connector position assurance locking pin from two-way ABCM connector, then disconnect connector, Fig. 126.
3. Disconnect 32-way ABCM connector, then turn ABCM retaining screw 1/4 turn.
4. Remove module by pulling downward. Avoid snagging wiring.
5. Reverse procedure to install.
NOTE: The ABCM contains a Electronically Erasable Programmable Read Only Memory (EEPROM) that must be reprogrammed
when a service replacement module is installed or a Diagnostic Trouble Code 82 will result.
