Coupe L4-1.9L DOHC VIN 7 (1994)
8. Separate carpeting at front of dash under shift cables.
IMPORTANT: Carpet is held together by a hook and loop type tape.
9. Remove the retainers, on both sides of the cable pass-through opening, holding the sound deadening material.
10. Roll back the sound deadening material at the front of dash to gain access to the cable pass through grommet.
CAUTION: Make sure vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist,
provide additional support for the vehicle on the opposite end from which components are being removed.
11. For 1991, 1992 and early production 1993 vehicles, perform the following steps:
a. Raise vehicle.
b. Remove cable grommet from front of dash by removing the two retaining nuts and pushing the grommet and retaining plate into the vehicle.
c. Lower vehicle and remove cables.
IMPORTANT: When removing and installing shift cables, it is helpful to have a second person inside the vehicle to guide the cables and
prevent them from being tangled.
12. For late production 1993 and 1994 vehicles, perform the following steps:
