Coupe L4-1.9L DOHC VIN 7 (1994)
20.
Install instrument panel A/C outer air outlet end cap and screws.
21.
Cycle power window and power lock (if equipped) to make sure there is no interference from the newly installed ground wire. If there is
interference, re-route wire to prevent interference.
22.
Install outer door panel. (Refer to "Outer Panel" procedure in the "Doors" section of the "Body/Collision Repair Service Manual.")
23.
Connect negative battery terminal.
Torque: 17 N-m (151 in.lbs.)
PARTS REQUIREMENTS:
12112245
Lead Kit-Ring Terminal (2 required)
21021078
Bolt/Screw (1 required)
21020792
Cable Tie Strap (3 required)
12089189
Crimp Seal - included with Lead Kit-Ring Terminal (2 required)
0.8 or 0.5 sq.mm (18 or 20 gauge) Stranded Wire (as required).
CLAIM INFORMATION:
To receive credit for this repair, submit a claim through the Saturn Dealer System as follows: (see illustration)