ION L4-2.0L SC (2007)
2. Pull the park brake boot through the opening in the console compartment.
3. Align the retaining fasteners with the console and push to secure.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the console compartment screws.
Tighten the console compartment screws to 2.5 N.m (22 lb in).
5. Snap the park brake boot to the console.
Front Floor Console Cup Holder Replacement
Front Floor Console Cup Holder Replacement
Removal Procedure
1. If equipped with an automatic or VTi transmission, apply the park brake and shift the transmission into neutral.
2. If equipped with an automatic or VTi transmission, remove the console shift lever bezel by carefully lifting up around the outside edge.
