ION L4-2.0L SC (2007)
12. Gently pull the park/turn bulb from the socket, if necessary.
13. To replace the wiring harness, perform the following steps:
1. Remove the 6-pin headlamp wiring harness connector from the tab on the headlamp housing (2).
2. Push the rubber grommet into the headlamp assembly.
3. Push the 6-pin connector through the opening that previously held the grommet (1).
Important: Remove the headlamp bulb and the headlamp retaining nut from the headlamp assembly/connector prior to the wiring harness
removal.
4. Carefully remove the wiring harness through the park/turn bulb access opening (3)
Installation Procedure