ION L4-2.0L SC (2007)
2. Install the J 43482 in order to support the clutch cover to the flywheel assembly.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the clutch cover to flywheel bolts.
Follow the tightening sequence. Tighten the bolts to 24 N.m (18 lb ft).
4. Remove the J 43482.
Important: Excessive amounts of lubricant on the input shaft splines may contaminate the clutch disc and cause clutch shudder.
5. Lubricate the inside diameter of the bearing with Saturn P/N 21005995, or equivalent.
6. Install the transmission.
7. Bleed the hydraulic system.
