saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Front Bumper Reinforcement > < Fascia Replacement - Front Bumper|Page 11165
Page 2
background image

1. Position the lower grille to the fascia. Press the grille into place.

Notice:  Refer to Fastener Notice  in Cautions and Notices.

2. Install the lower grille retaining screws.

Tighten the screws to 2.5 N.m (22 lb in). 

3. Install the front fascia. Refer to Fascia Replacement - Front Bumper  (See: Fascia Replacement - Front Bumper) .

4. Connect the fog lamp bulb connector, if equipped.
5. Lower the vehicle

Front Bumper Reinforcement > < Fascia Replacement - Front Bumper|Page 11165