saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Rear Bumper Reinforcement > < Body - TPO Fascia Cleaning Prior to Painting|Page 11192
Page 3
background image

3. Install the push-in retainers into the wheelhouse liner.

Notice:  Refer to Fastener Notice  in Cautions and Notices.

4. Install the screws to the rear fascia inner edge of the quarter panel.

Tighten the screws to 3 N.m (27 lb in).

5. Install the push-in retainers into the fascia filler.
6. Lower the vehicle
7. Close the rear compartment.

Rear Bumper Reinforcement > < Body - TPO Fascia Cleaning Prior to Painting|Page 11192