ION L4-2.2L VIN F (2004)
Front Door Striker: Service and Repair
Striker Replacement - Door
Removal Procedure
1. Remove the striker bolts (2).
2. Remove the washer (4).
3. Remove the spacer (3).
4. Remove the striker (1).
Installation Procedure
1. Install the washer (4).
2. Install the spacer (3).
3. Install the striker (1).
4. Align the lock striker. Refer to Lock Striker Adjustment - Door (Sedan, Coupe - Front) (See: Rear Door/Rear Door Striker/Adjustments/Lock
Striker Adjustment - Door (Sedan, Coupe - Front)) .
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the striker bolts (2).
Tighten the striker bolts (2) to 25 N.m (18 lb ft).