saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
SIR Disabling and Enabling Zones|Page 11678 > < SIR Disabling and Enabling Zones|Page 11676

ION L4-2.2L VIN F (2004)

Page 3
background image

10. Lower the headliner to access the seat belt pretensioner-LF connector.
11. Remove the CPA from the seat belt pretensioner-LF connector.
12. Disconnect the seat belt pretensioner-LF connector.

ENABLING PROCEDURE

1. Remove the key from the ignition switch.
2. To enable the roof rail module-left, skip to step 5. To enable both the roof rail module-left and the seat belt pretensioner-LF, continue to step 3.

3. Connect the pretensioner-LF connector and install the CPA.
4. Install the headliner.

SIR Disabling and Enabling Zones|Page 11678 > < SIR Disabling and Enabling Zones|Page 11676