ION L4-2.2L VIN F (2004)
2. Pull the garnish molding to disengage the trim clips.
INSTALLATION PROCEDURE
1. Position the garnish molding.
2. Push on the molding until the trim clips engage.
3. Install the upper garnish molding to the rear access door.
Garnish Molding Replacement - Center Pillar Lower (Sedan)
Garnish Molding Replacement - Center Pillar Lower (Sedan)
Removal Procedure
Caution: Refer to SIR Caution in Cautions and Notices.
Caution: In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door pillar in the