saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Procedures|Page 12159 > < Procedures|Page 12157
Page 3
background image

1. Route the rear drain hose down the rear window pillar.

2. Connect the rear drain hose to the sunroof module.
3. Connect the rear drain hose to the attachments on the rear window pillar.
4. Push the rear drain hose and grommet into the hole in the rear compartment panel until the grommet is fully engaged.
5. Install the rear compartment trim panel.
6. Install the headliner. Refer to Headliner Replacement (w/ Sunroof)  (See: Interior Moulding / Trim/Headliner/Service and Repair/Headliner

Replacement (w/ Sunroof))Headliner Replacement (w/o Sunroof)  (See: Interior Moulding / Trim/Headliner/Service and Repair/Headliner
Replacement (w/o Sunroof)) in Interior Trim.

Sunroof Drain Hose Replacement - Front (Monte Carlo)

Sunroof Drain Hose Replacement - Rear

Removal Procedure

1. Remove the headliner. Refer to Headliner Replacement (w/ Sunroof)  (See: Interior Moulding / Trim/Headliner/Service and Repair/Headliner

Replacement (w/ Sunroof))Headliner Replacement (w/o Sunroof)  (See: Interior Moulding / Trim/Headliner/Service and Repair/Headliner
Replacement (w/o Sunroof)) in Interior Trim.

2. Remove the rear drain hose from the sunroof module.
3. Disengage the sunroof drain hose from the attachment points on the rear window pillar.
4. Remove the rear compartment trim panel.
5. Pull the sunroof drain hose and grommet out of the rear compartment panel.
6. Pull the rear drain hose out of the rear compartment. Remove the front drain hose.

Installation Procedure

Procedures|Page 12159 > < Procedures|Page 12157