ION L4-2.2L VIN F (2004)
5. Position the seat back between the recliners.
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Install the seat back frame bolts.
Tighten the bolts to 60 N.m (44 lb ft).
7. Install the seat back panel.
8. Install the screws to the seat back panel.
Tighten the bolts to 1 N.m (9 lb in).
9. Install the outer trim panel to the seat cushion.
10. Install the outer trim panel screws.
Tighten the bolts to 1 N.m (9 lb in).
11. Install the trim panels to the inboard and the outboard seat back recliners.
12. Install the trim panel screws.
Tighten the bolts to 1 N.m (9 lb in).
13. Install the head restraint. Refer to Head Restraint Replacement - Front Seat (See: Head Restraint Replacement - Front Seat) .
14. Install the front seat from the vehicle. Refer to Seat Replacement - Front Bucket (See: Service and Repair/Seat Replacement - Front Bucket) .
