ION L4-2.2L VIN F (2004)
6. Remove the brake pressure modulator assembly bracket mounting nut and mounting bolts.
7. Remove the bracket from the vehicle.
Installation Procedure
1. Install the BPMV assembly bracket to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the brake pressure modulator assembly bracket mounting nut and mounting bolts.
-
Tighten the nut to 25 Nm (18 ft. lbs.).
-
Tighten the bolts to 25 Nm (18 ft. lbs.)
3. Secure the forward lamp wiring harness retainer to the BPMV bracket.