ION L4-2.2L VIN F (2004)
13. Install and secure park brake cable pass-thru grommet (1) to the opening in the vehicle underbody.
14. If a new park brake cable is being installed, secure the underbody retainer (2) to the vehicle underbody.
15. If the park brake cable is being reused, install the park brake cable to the underbody retainer (2) and press the tab into place to secure.
16. Lower the vehicle.
17. Secure the cable fitting to the park brake lever bracket. Attempt to pull the park brake cable free of the lever bracket, to ensure that the retaining
tabs on the fitting are properly secured.
18. Install the cable end (2) to the cable equalizer.
19. Reposition the carpet to the installed position.
20. Install the rear carpet retainers.
21. Install the rear seat lower cushion.
22. Adjust the park brake cable tension.
23. Install the front floor console.