ION L4-2.2L VIN F (2004)
4. Ensure that the alignment notches are aligned with the camshaft sprocket.
5. Install the exhaust camshaft.
6. Install the camshaft bearing caps.
Notice: Refer to Fastener Notice in Service Precautions.
7. Tighten the camshaft bearing cap bolts in increments of 3 turns until they are seated.
^
Tighten the camshaft bearing cap bolts to 10 Nm (89 inch lbs.).
8. Install camshaft sprockets onto the camshafts.
9. Hand tighten NEW camshaft sprocket bolts.
10. Remove the J 43655.
11. Tighten the camshaft sprocket bolts.
^
Tighten the bolts to 85 Nm (63 ft. lbs.) plus 30°.
