ION L4-2.2L VIN F (2004)
8. Remove the camshaft cover.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions
1. Install the camshaft cover and bolts.
^
Tighten the camshaft cover bolts to 10 Nm (89 inch lbs.).
2. Install the ground strap to the camshaft cover.
^
Tighten the ground strap stud to 10 Nm (89 inch lbs.).
3. Install the ignition coil and module assembly.
4. Install the fuel pipe bracket.
