ION L4-2.2L VIN F (2004)
1. Place the engine mount onto the mid rail and hand start the nuts.
Notice: Refer to Fastener Notice in Service Precautions.
2. Tighten the engine mount to midrail nuts.
^
Tighten the nuts to 100 Nm (74 ft. lbs.).
Important: The engine mount to intermediate bracket bolts must be hand started. Do not pry the engine mount to align the holes.
3. Hand start the engine mount to intermediate bracket bolts.
4. Tighten the engine mount to intermediate bracket bolts.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Remove the hydraulic floor jack.
6. Install the air cleaner assembly.