ION L4-2.2L VIN F (2004)
Timing Chain: Service and Repair
The content of this article reflects the changes called out by TSB - 02-03-08-006.
Timing Chain, Sprockets, and/or Tensioner Replacement
Removal
1. Disconnect negative battery cable.
2. Raise and support the vehicle.
3. Remove the engine timing cover.
Important:
The timing chain has two matching colored links and one uniquely colored link.
4. Rotate the engine until the crankshaft sprocket mark aligns with the matching colored link (2) at the 5 o'clock position.
5. Lower the vehicle.
6. Remove the camshaft cover.
7. Ensure that the INT diamond on the intake camshaft sprocket is aligned with the uniquely colored link (1) at the 2 o'clock position.
