ION L4-2.2L VIN F (2004)
9. Make certain that the new drive plate bolt has colored adhesive on at least 5 threads. Install the clutch drive plate bolt. Use the J 37872 to hold the
compressor clutch plate from turning.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the compressor clutch drive plate bolt to 12 N.m (106 lb in).
10. Install the compressor.
11. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
12. Leak test the fittings using the J 39400-A.