ION L4-2.2L VIN F (2004)
5. Install the compressor hose and new seal washer to the condenser.
Tighten
Tighten the bolt to 20 N.m (15 lb ft).
6. Install the condenser tube and new seal washer to the condenser.
Tighten
Tighten the bolt to 20 N.m (15 lb ft).
7. Lower the vehicle.
8. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
9. Leak test the fittings using the J 39400-A.
