ION L4-2.2L VIN F (2004)
3. Place a drain pan under the water pump drain port.
4. Loosen the water pump drain bolt (1) and drain the coolant from the water pump.
5. Close and tighten the water pump drain bolt (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 10 N.m (88 lb in).
6. Lower the vehicle.
7. Reposition the heater outlet hose clamp at the heater core using SA9111E.
8. Remove the heater outlet hose from the heater core.