ION L4-2.2L VIN F (2004)
Audible Warning Device: Description and Operation
AUDIBLE WARNINGS DESCRIPTION AND OPERATION
The audible warnings alert the driver of a system concern or a critical vehicle condition. The instrument panel cluster (IPC) generates the audible
warnings. The IPC receives audible warning requests via the class 2 serial data line. If the IPC receives multiple audible warning requests, the warning
with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:
1. Fast rate chime-200 pulses per minute
2. Medium rate chime-150 pulses per minute
3. Slow rate chime-50 pulses per minute
4. Single chime
Fasten Safety Belt Warning
The IPC activates the fasten safety belt audible warning as requested by the SDM. The SDM sends a class 2 message to the IPC. The fasten safety belt
warning sounds and the fasten safety belt indicator illuminates when the following occurs:
-
The ignition switch transitions to ON.
-
The inflatable restraint sensing and diagnostic module (SDM) detects that the driver's seat belt is not buckled and or the signal is low. The IPC
receives a class 2 message from the SDM indicating the driver's seat belt status.
If the seat belt is buckled when the ignition is turned ON, the chime does not sound. If the seat belt is buckled while the chime is sounding, the chime
stops. If the seat belt is unbuckled after the initial transition to ON, the chime does not sound.
Key in Ignition Warning
The IPC activates the key-in-ignition audible warning as requested by the body control module (BCM). The BCM sends a class 2 message to the IPC.
The key-in-ignition warning sounds when the following occurs:
-
The ignition switch is OFF.
-
The body control module (BCM) determines that the driver's door is open and the signal circuit is low.
-
The BCM determines that the key-in-ignition switch is closed and the signal circuit is low.
Lights On Warning
The IPC activates the lights on warning as requested by the body control module (BCM). The BCM sends a class 2 message to the radio indicating the
chime frequency of a fast rate and a continuous duration. The lights on warning sounds when the following occurs:
-
The ignition is OFF.
-
The BCM determines that the driver's door is open and the signal circuit is low.
-
The BCM determines that the headlamp switch is in the park or head position.
Park Brake Warning
The IPC activates the park brake audible warning as requested by the body control module (BCM). The BCM sends a class 2 message to the IPC. The
park brake warning sounds and the BRAKE indicator illuminates when the following occurs:
-
The ignition is ON.
-
The vehicle speed is greater than 5 km/h (3.1 mph). The BCM receives a class 2 message from the ECM indicating the vehicle speed.
-
The BCM determines that the park brake is engaged and the signal circuit is low.
