saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
SIR Disabling and Enabling Zones|Page 12740 > < SIR Disabling and Enabling Zones|Page 12738

ION L4-2.2L VIN F (2004)

Page 2
background image

7. Remove the connector position assurance (CPA) from the seat belt pretensioner-LF connector.
8. Disconnect the seat belt pretensioner-LF connector from the vehicle harness connector.

9. Remove the garnish molding from the upper lock pillar.

10. Remove the CPA from the roof rail module-left connector.
11. Disconnect the roof rail module-left connector from the vehicle harness connector.

ENABLING PROCEDURE

1. Remove the key from the ignition switch.

2. Connect the roof rail module-left connector to the vehicle harness connector.
3. Install the CPA to the roof rail module-left connector.
4. Install the garnish molding to the upper lock pillar.

SIR Disabling and Enabling Zones|Page 12740 > < SIR Disabling and Enabling Zones|Page 12738