ION L4-2.2L VIN F (2004)
5. Connect the roof rail module-left connector to the vehicle harness connector.
6. Install the CPA to the roof rail module-left connector.
7. Install garnish molding to the upper lock pillar.
8. Install the AIR BAG fuse into the body control module fuse center.
9. Install the body control module fuse center cover.
10. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
11. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -
Restraint Systems.
SIR Disabling and Enabling Zone 2 (Sedan)
SIR DISABLING AND ENABLING ZONE 2 (SEDAN)
DISABLING PROCEDURE
