ION L4-2.2L VIN F (2004)
1. Install the bulbs to the tail lamp, backup lamp, and/or side marker lamp sockets.
2. Install the tail lamp and/or backup lamp sockets to the tail lamp. Rotate the sockets clockwise until the locking tabs are fully seated.
3. Install the side marker lamp socket to the tail lamp. Rotate the socket clockwise until the socket is fully seated.
4. Connect the electrical connector to the tail lamp wiring harness.
5. Position the tail lamp to the quarter panel.
6. Install the tail lamp screws to the tail lamp.
NOTE: Refer to Fastener Note in Service Precautions.
Tighten the tail lamp screw to 2 N.m (18 lb in).
7. Close the rear compartment.
