ION L4-2.2L VIN F (2004)
Oil Filter: Service and Repair
Engine Oil and Oil Filter Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Place a drain pan under the oil drain plug.
3. Remove the oil pan drain plug.
Important: DO NOT use an open end wrench on the hex on top of the oil filter cap.
4. Use a 32 mm (1 1/4 inch) socket on the hex on the top of the oil filter cap, or an oil filter wrench on the outside diameter of the oil filter cap.
5. Remove the oil filter cap with filter.
6. Remove the filter from the cap.
Installation Procedure
