saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
Underhood Electrical Center or Junction Block Bracket Replacement|Page 2090 > < Underhood Electrical Center or Junction Block Bracket Replacement|Page 2088

ION L4-2.2L VIN F (2004)

Page 7
background image

9. Tighten the underhood electrical center bracket mounting bolt.

Tighten the bolt to 25 N.m (18 lb ft).

10. Secure the forward lamp harness retainer to the outboard side of the ECM tray.
11. Secure the EPS cable retainer to the underhood electrical center bracket.

12. Install the TCM, if equipped, with harness to the underhood electrical center bracket.

13. Install the ECM (1) with harness, to the underhood electrical center bracket.

Underhood Electrical Center or Junction Block Bracket Replacement|Page 2090 > < Underhood Electrical Center or Junction Block Bracket Replacement|Page 2088