ION L4-2.2L VIN F (2004)
steps necessary to be sure the recall correction has been made before selling or releasing the vehicle.
Disclaimer
Service Procedure
Service Procedure Canada
DRL Jumper Kit and Park/Turn Signal/DRL Bulb Installation
1.
Open the hood.
2.
Pull up on headlamp assembly retaining pins. Remove the pins.
3.
Position the headlamp assembly away from the vehicle to access the headlamp electrical connector.
4.
Disconnect the forward lamp harness electrical connector from the headlamp assembly.
5.
Remove the park/turn signal/DRL bulb access cover by rotating the cover counterclockwise.
6.
Remove the park/turn signal/DRL bulb socket from the headlamp housing by rotating the socket counter clockwise.
7.
Gently pull the park/turn signal/DRL bulb from the socket. Discard old bulb.
8.
Install the new park/turn signal/DRL bulb (P/N 15233607) into the socket.
9.
Install the park/turn signal/DRL bulb socket into the headlamp housing by rotating the socket clockwise.
10.
Install the park/turn signal/DRL bulb access cover by rotating it clockwise.
11.
Perform steps 2-10 for opposite headlamp assembly.
