ION L4-2.2L VIN F (2004)
1. Apply a few drops of clean engine oil to the male pipe end.
CAUTION: In order to reduce the risk of fire and personal injury, before connecting fuel pipe fittings, always apply a few drops of clean
engine oil to the male pipe ends.
This will ensure proper reconnection and prevent a possible fuel leak.
During normal operation, the O-rings located in the female connector will swell and may prevent proper reconnection if not lubricated.
2. Push both sides of the quick-connect fittings together in order to snap the retainer in place.
3. Pull on both sides of the quick-connect fitting in order to make sure the connection is secure.