saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Knock Sensor > < Ignition Switch - Key Hard to Insert/Won't Rotate|Page 4527
Page 1
background image

Ignition Switch Lock Cylinder: All Technical Service Bulletins
Body - Lock Set Servicing Information

Bulletin No.: 05-08-64-020A

Date: May 11, 2006

INFORMATION

Subject:
Information on Servicing Lock Cylinder Components

Models:
2003-2006 Saturn ION

Supercede:

This bulletin is being updated with additional information about servicing vehicles with old-design lock sets. Please discard Corporate Bulletin Number
05-08-64-020 (Section 08 - Body & Accessories).

The purpose of this bulletin is to inform Saturn Retailers of a change to service parts availability for Saturn ION lock cylinder components. The current
lock cylinder kits for the doors, rear compartment and ignition cylinder will be modified to now include additional component parts to build up a
complete ignition, door or rear compartment lock cylinder assembly.

The new lock cylinder kits listed in the Parts Information table can be used to replace or repair lock cylinder assemblies on ION sedans built after VIN
breakpoint 5Z143105 and ION coupes built after VIN breakpoint 5Z147894. These new design lock cylinders contain new aluminum tumblers instead of
brass tumblers and have a different coating on the cylinders.

Important:

To service all lock sets on Saturn IONs built prior to and including VIN breakpoints 5Z143105 (sedan) and 5Z147894 (coupe), refer to pages 9-54
through 9-57 in the Saturn ION Parts and Illustration catalog for appropriate part numbers. Do NOT mix and match new aluminum tumblers and hex
chrome-free coated cylinders with old brass tumblers and hex chrome-coated cylinders.

Once inventory of these individual component parts from pages 9-54 through 9-57 in the Saturn ION Parts and Illustration catalog are depleted, the new
lock cylinder kits, P/Ns 15785081, 15785082, 15785083 and 15785084 can also be used on IONs built prior to VIN breakpoint 5Z143105 (sedan) and
5Z147894 (coupe) as long as the complete ignition lock cylinder, door lock cylinder or rear compartment lock cylinder is replaced. (It is not necessary to
replace all lock cylinders on a vehicle when servicing only one particular lock cylinder.)

Parts Information

Disclaimer

Knock Sensor > < Ignition Switch - Key Hard to Insert/Won't Rotate|Page 4527