ION L4-2.2L VIN F (2004)
Transmission Position Switch/Sensor: Adjustments
Park/Neutral Position Switch Adjustment
^
Tools Required
-
J 36346 Fascia Retainer Remover
-
J 44810 Transaxle Range Switch Alignment Tool
1. Apply the parking brake.
2. Place the transmission shift lever in the neutral position.
3. Using the J 36346 or equivalent, disconnect the shift cable from the park/neutral shift lever.
4. Remove the park/neutral position switch lever and nut.
5. Loosen the park/neutral position switch bolts.
6. Install the J 44810 to the manual shaft in order to align the pointer to the neutral base line.
7. Rotate the park/neutral position switch as necessary until the tool drops into the hole on the park/neutral position switch.