ION L4-2.2L VIN F (2004)
Relay Box: Service and Repair
Underhood Electrical Center or Junction Block Bracket Replacement
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK BRACKET REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the cover from the underhood electrical center.
3. Remove the underhood positive battery terminal lug (1).
4. Disconnect the positive battery cables (2) from the underhood electrical center.
IMPORTANT: Take note of the positioning of the positive battery cables before disconnecting the cables.
5. Remove the electric power steering (EPS) cable nut from the underhood electrical center.
6. Disconnect the EPS cable (3) from the underhood electrical center.
