saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
SIR Disabling and Enabling Zones|Page 9290 > < SIR Disabling and Enabling Zones|Page 9288

ION L4-2.2L VIN F (2004)

Page 13
background image

ENABLING PROCEDURE

1. Remove the key from the ignition switch.
2. To enable the roof rail module-right, skip to step 6. To enable both the roof rail module-right and the seat belt pretensioner-RF, continue to step 3.

3. Connect the roof rail module-right connector to the vehicle harness connector.
4. Install the CPA to the roof rail module-right connector.
5. Install the garnish molding to the upper lock pillar.

6. Connect the seat belt pretensioner-RH connector and install the CPA.
7. Install the headliner.

SIR Disabling and Enabling Zones|Page 9290 > < SIR Disabling and Enabling Zones|Page 9288