saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 9294 > < SIR Disabling and Enabling Zones|Page 9292
Page 17
background image

7. Install the AIR BAG fuse into the body control module fuse center.
8. Install the body control module fuse center cover.
9. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.

10. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -

Restraint Systems.

SIR Disabling and Enabling Zone 8 (Coupe)

SIR DISABLING AND ENABLING ZONE 8 (COUPE)

DISABLING PROCEDURE

1. Turn the steering wheel so that the vehicles wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Locate the body control module fuse center then remove the fuse center cover.
5. Locate and remove the AIR BAG fuse from the body control module fuse center.

SIR Disabling and Enabling Zones|Page 9294 > < SIR Disabling and Enabling Zones|Page 9292