ION L4-2.2L VIN F (2004)
10. Remove the automatic transmission control module (TCM), if equipped, from the underhood electrical center bracket, and reposition the module
with harness, toward the engine.
11. Release the EPS cable retainer from the underhood electrical center bracket.
12. Release the forward lamp harness retainer from the outboard side of the ECM tray.
13. Release the surge tank inlet hose clip from the electrical center bracket.
14. Remove the cooling system surge tank mounting nut.
15. Remove the underhood electrical center bracket mounting nut.
16. Remove the electrical center bracket mounting bolt.
17. Lift the bracket off of the studs and reposition the bracket slightly toward the engine.
