ION L4-2.2L VIN F (2004)
5.
Remove the park/turn signal/DRL bulb access cover by rotating the cover counterclockwise.
6.
Remove the park/turn signal/DRL bulb socket from the headlamp housing by rotating the socket counter clockwise.
7.
Gently pull the park/turn signal/DRL bulb from the socket. Discard old bulb.
8.
Install the new park/turn signal/DRL bulb (P/N 15233607) into the socket.
9.
Install the park/turn signal/DRL bulb socket into the headlamp housing by rotating the socket clockwise.
10.
Install the park/turn signal/DRL bulb access cover by rotating it clockwise.
11.
Perform steps 2-10 for opposite headlamp assembly.
Important:
The charts shown will help determine if the vehicle needs the DRL jumper kit installed. Please note the VIN ranges associated with the two
