ION L4-2.2L VIN F (2004)
1. Install a new spring over the ignition lock cylinder solenoid plunger.
2. Carefully install the new ignition lock cylinder solenoid over the plunger.
Notice: Refer to Fastener Notice in Service Precautions.
3. Seat the ignition lock cylinder solenoid on the lock cylinder case housing and install the screws.
-
Tighten the screws to 2 Nm (17 inch lbs.).
4. Connect the lock cylinder solenoid harness connector.
5. Install the steering column trim covers.
6. Check the operation of the ignition lock cylinder solenoid.
