ION L4-2.2L VIN F (2004)
Steering Gear: Service and Repair
Power Steering Gear Replacement
NOTE: The content of this article/image reflects the changes called out by TSB: 05-03-08-008A.
Power Steering Gear Replacement
-
Tools Required
-
SA91 100C Tie Rod Separator
Removal Procedure
1. Turn the steering wheel to the straight ahead position and remove the key from the ignition.
2. Turn the wheel counter clockwise in order to lock the steering column in place.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the front wheels.
Important: Do not rotate the intermediate shaft once separated from the gear. Possible damage or a malfunction could occur.
5. Remove the steering gear to intermediate shaft pinch bolt and discard.
6. Disconnect the intermediate shaft from the steering gear.
7. Remove both steering gear outer tie rod to knuckle nuts and discard the nuts.
